If you are a professional in the construction industry, then you probably already have an electric edm machine at your disposal. That’s great but what if you need to cut a certain amount of wire that is not included in the package?
Most modern edm machines have the ability to handle wire of various sizes. With that said, there is one type of wire that will not fit on most edm machines, and that is the wire that has a different gauge. That means that you have to purchase it separately.
Wire gauges vary according to the properties of the wire. Usually, when you purchase smaller wires, they will be easier to cut, but you will find that they are not very useful unless you need them to be wrapped around pipes or equipment. These smaller gauge wires are also less durable than the larger wires that are generally used in edm machines.
The easiest way to keep your wire in good shape is to always keep them cut to the same gauge. While some people will complain about this not being good for the environment, there is no doubt that it is the safest way to go. You can only lose as much material as you make.
If you do decide to use a larger gauge wire, always cut it using a reciprocating saw. When you use the reciprocating saw, you are cutting in a 360 degree angle, which will help to keep the wire cut thinner. While you may think that cutting this way will be too risky for your hands, you will find that the edges will be very sharp and the edges are protected by the saw blades.
One other thing to remember is that some cuts will be more difficult than others. For example, the smaller sized ones are easier to cut, but they can also be sharp and you will find that they will fold more easily. Using a machine with a larger handle will help you handle these smaller gauges of wire much better.
For those who are interested in having custom-made wires made, they can always take advantage of that service. They will be able to choose from many different gauges, as well as colors and types of wire. However, for this type of wire, it will need to be purchased by the individual.
No matter what wire you are using in your edm machine, always remember to keep it cut to the same gauge. Even though you may think that you are saving money, you may not be aware of the amount of waste that you are creating in the long run.